Updating kernel in linux mint

For example, a small-size bootloader is copied to the CPU internal memory, performs initialization of external memory and copies the second-level loader to the external RAM.The second-level loader (for example, U-Boot) copies the Linux kernel to RAM and hands over control to it.Memory is overwritten using flash_eraseall (for erasing the memory) and nandwrite (for writing images to the NAND memory), which are included in the mtd-utils package.When update files are received and checked, you can start the process of writing them to the system ROM.An important part of the update process is checking the version of the received files and their integrity.You can do this using such algorithms as MD5, CRC32 and so forth.If problems arise, you will be able to go back to the old firmware (via TFTP).

This method is well suited for those who have created their own firmware image.You can implement various software update options, depending on ROM capacity. Sections of the Flash Memory of a Device with the Possibility of Restoring the Old Firmware The next step is to set the U-Boot bootloader environment variables for loading the new firmware.U-Boot environment variables can be read and written from Linux using such commands as fw_printenv and fw_setenv (the source code is included in the U-Boot distribution).Typically, a Linux-based system has the following structure of volatile memory.The first section is filled with a Linux kernel loader, which in turn can be executed in several stages.

Leave a Reply